Active filters
The Konica Minolta KM1024i MHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure.
This printhead 5540 without memory board is suitable for Mimaki CJV300 & JV300 series printers. This is the original Mimaki part (number M015372 replacing number M015307).
The Epson DX4 (fourth generation micro-piezo printhead) has a typical firing frequency of 8 kHz, a minimum droplet size of 3.5 pico litre and is used for either 1 colour through both channels or 2 colours through the independent channels.
This print head is suitable for Mutoh Drafstation printers. This is the original Mutoh printhead (part number DF-49029) with a Mutoh 40 digit head ID. This printhead is intended to be used with water based inks. Please refer to PPHMUVJ1204 for the 24 digit head ID solvent based Mutoh printhead.
The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.
Compatible with a wide range of oil-based, solvent and dye sublimation inks, the Xaar 128 is extensively used across the coding & marking and wide-format graphics industries. It's a consistent and highly flexible inkjet solution for producing eye-catching marketing media.
This original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Epson DX4 Solvent printhead is suitable for Roland, Mutoh and Mimaki eco-solvent and mild solvent printers. The Epson DX4 printhead has a native resolution of 360 dpi, 2 nozzle lines (corresponding with 2 independent ink channels) and 180 nozzles per line.
This Mimaki UJF-605CII Print Head Assembly is made of an original Toshiba CA4 printhead, a compression damper and a damper cover, already assembled for easy installation. This printhead corresponds to Mimaki part number M007040. It features a one year warranty.
The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.
This Head Assembly is suitable for Mimaki UJF-7151 Plus printers. This is the original Mimaki part (number M017429).
This printhead GEN5 is suitable for Mimaki JFX200-2513 printers
