This solvent resistant Epson printhead is suitable for certain solvent based Chinese DX7 printers manufactured after 2014. This printhead has 8 channels and 180 nozzles per channel. It has a 3,5 picoliter drop size with Variable-Sized Droplet technology.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Epson DX7 eco solvent print head dx7 printhead for cabezal Epson
This solvent resistant Epson printhead is suitable for certain solvent based Chinese DX7 printers manufactured after 2014. This printhead has 8 channels and 180 nozzles per channel. It has a 3,5 picoliter drop size with Variable-Sized Droplet technology.
This printhead is the new DX7 head model released by Epson after 2014. It is encrypted and it is compatible with new printhead control boards installed on printers after the end of 2013. In order to determine whether you need a new or old DX7 head model, you should check the 3 letters printed under the head ID of your old printhead: if it start with Fxx or bellow, you must use old heads only (PPHEP13801O), if it starts with Gxx or above, you should run new heads only (PPHEP13801).
Product Specifications
Technology: Micro-Piezo Native resolution: 1440 dpi Min. Droplet Size: 1.5 pico litre Max. Droplet Size: 21 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: eco-solvent and mild solvent
It is highly recommended to replace the head cables together with a new printhead.
This solvent resistant Epson printhead is suitable for certain solvent based Chinese DX7 printers manufactured after 2014. This printhead has 8 channels and 180 nozzles per channel. It has a 3,5 picoliter drop size with Variable-Sized Droplet technology.
This new generation Epson MicroPiezo TFP printhead is suitable for Epson Stylus Pro 11880 printers. It has a native resolution of 2.880 x 1.440 dpi, providing the highest resolution in the industry. The Epson Stylus Pro 11880 Printhead has a minimal drop volume of 3.5 pl and 9 ink channels. This is the original Epson print head (part number F179020 replacing F179000).
The Konica Minolta KM1024 LH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Brand : AirTrack Model : Printhead Print Resolution :203 dpi AirTrack Printheads - Printhead for Zebra Printer Model No. ZM400. 203 dpi Compatible to part number 79800M
The Spectra SE-128 AA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 900 dpi. Two electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 128 nozzles. It has been calibrated for a droplet size of 30 pico litre and has a maximum firing frequency of 40 kHz.
The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.
This print head is suitable for Mutoh Drafstation printers. This is the original Mutoh printhead (part number DF-49029) with a Mutoh 40 digit head ID. This printhead is intended to be used with water based inks. Please refer to PPHMUVJ1204 for the 24 digit head ID solvent based Mutoh printhead.
Compatible with a wide range of oil-based, solvent and dye sublimation inks, the Xaar 128 is extensively used across the coding & marking and wide-format graphics industries. It's a consistent and highly flexible inkjet solution for producing eye-catching marketing media.
The Konica Minolta KM1024i MAE-C printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure.