The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Genuine NEW KM1024 LNB 42PL Print Head KM1024LNB/42PL Printhead Original print head konica km1024 LNB printhead 42pl print head for konica inkjet printer New Konica Minolta KM1024 LNB 42PL Printhead
The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 LN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 LN print head has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 LNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty. This Printhead is used for white ink on Agfa printers.
Specifications Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle) Native Resolution: 360 dpi Cal. Droplet Size: 42 pico litre Max. Drops in Greyscale: 8 drops Tot. Amount of Nozzles: 1024 (512 nozzles per line) Nozzle Spacing: 70.5 microns Print Width: 72 mm Firing Frequency: 6.7 kHz Ink Compatibility: Oil based and Solvent Inks Heater: not integrated
The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
This Mimaki UJF-605CII Print Head Assembly is made of an original Toshiba CA4 printhead, a compression damper and a damper cover, already assembled for easy installation. This printhead corresponds to Mimaki part number M007040. It features a one year warranty.
This Seiko 508GS 12PL solvent / UV printhead is suitable for a range of printers, including Infiniti printers. The Seiko 508GS is a state of the art grayscale print head with a built-in damper assembly and a nozzle guard. This is the original Seiko part (number IRH2533U-2410).
This Gen5 (MH5420/5440) N221345D Printhead Assy Type-D is suitable for Mimaki TS500-1800 & TX500-1800 series printers. This is the original Mimaki part (number M014140).
The Epson DX4 (fourth generation micro-piezo printhead) has a typical firing frequency of 8 kHz, a minimum droplet size of 3.5 pico litre and is used for either 1 colour through both channels or 2 colours through the independent channels.
Brand : AirTrack Model : Printhead Print Resolution :203 dpi AirTrack Printhead - for BIZERBA Printer Model No. GS. 203 dpi Compatible to part number KF2003-GL14
Brand : AirTrack Model : Printhead Print Resolution :300 dpi AirTrack Printheads - Printhead for Zebra Printer Model No. S4M. 300 dpi Compatible to part number G41401M