The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the necessary waveform information. It carries a product warranty.
Specifications
Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle) Native Resolution: 360 dpi Cal. Droplet Size: 14 pico litre Max. Drops in Greyscale: 8 drops Tot. Amount of Nozzles: 1024 (512 nozzles per line) Nozzle Spacing: 70.5 microns Print Width: 72 mm Firing Frequency: 12.8 kHz Ink Compatibility: Oil Based and Solvent Inks Heater: not integrated
The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
This Mimaki UJF-605CII Print Head Assembly is made of an original Toshiba CA4 printhead, a compression damper and a damper cover, already assembled for easy installation. This printhead corresponds to Mimaki part number M007040. It features a one year warranty.
Brand : AirTrack Model : Printhead Print Resolution :203 dpi AirTrack Printheads - Printhead for Zebra Printer Model No. 110xiIII Plus 203 dpi Compatible to part number G41000-1M
Brand : AirTrack Model : Printhead Print Resolution :300 dpi AirTrack Printheads - Printhead for Zebra Printer Model No. S4M. 300 dpi Compatible to part number G41401M
This UV printhead assy including 4 dampers part (number DG-41543) is suitable for Mutoh Valuejet 426UF printers. This is the original Mutoh part (number DG-45279). Mutoh
The Roland VS Series DX6 is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the Roland VS Series DX6 Print Head is 8 kHz.
Brand : AirTrack Model : Printhead Print Resolution :300 dpi AirTrack Printheads - Printhead for Zebra Printer Model No. ZM400. 300 dpi Compatible to part number 79801M
This printhead can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the VJ-1324, VJ-1624 VJ-426UF and VJ-1617H printhead is 8 kHz.
This print head is suitable for VUTEk PressVu 320/400 and 200/600 printers (Vutek part number AA92037 ASM). Note that the print head is supplied in the original Spectra sealed packaged and doesn't include the metallic base manufactured by VUTEk.
The Spectra SE-128 AA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 900 dpi. Two electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 128 nozzles. It has been calibrated for a droplet size of 30 pico litre and has a maximum firing frequency of 40 kHz.
