Printronix printhead replacement products offer quality, reliability and performance. The print head is a vital component of the printer that creates the image on the face of the media. Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet the exacting engineering standards for continuous printer reliability and performance.
The thermal printhead is the most critical component of your thermal barcode printer as well as the most delicate of its parts. Taking proper care of your printhead ensures the longest printhead life and excellent print quality. Improper maintenance can result in premature printhead failure.
When removing and installing a printhead, carefully follow the Printhead Replacement instructions in the Operator/Maintenance Manual for your specific printer model.
The Konica Minolta KM1024 SHB : 3688H print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Best-in-class print quality: the Xaar 1201 delivers a high print quality superior to other printheads in its class. 8 grey levels at 600 npi give an apparent resolution of better than 1440 dpi.
This ASM, Jetpack QS S30 Simrez QS Prod is suitable for VUTEk QS series printers. This printhead includes the heating element and the smoothing electronic board. This is the original VUTEk part (number 45076491).
The Roland VS Series DX6 is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the Roland VS Series DX6 Print Head is 8 kHz.